Add-on gearboxes

Combining the SIPOS SEVEN rotary actuators with additional gearboxes they become …

  • … a linear actuator, e.g. for the automation of globe valves.
  • … a part-turn actuator with base & lever, e.g. for the automation
    of dampers via damper rods.
  • … a part-turn actuator in combination with a worm gearbox, e.g. for the automation of butterfly, ball or plug valves.
  • … a rotary actuator with higher torque range in combination with bevel or spur gearboxes, e.g. for the automation of gate valves or special solutions.

COMBINATIONS WITH LE THRUST UNITS

  • Forces: 3,8–217 kN
  • Strokes up to 500 mm
  • Positioning speeds range 20–360 mm/min

COMBINATIONS WITH GF WORM GEARBOXES

Torques: 150–45000 Nm

COMBINATIONS WITH GS WORM GEARBOXES

Torques: 150–675000 Nm

COMBINATIONS WITH GK OR GST MULTI-TURN GEARBOXES

Torques: up to 16 000 Nm

The SIPOS SEVEN can be customized to suit different drive types such as linear, part-turnor multi-turn gearboxes. The properties (parameters) of the most common gearboxes are included in the operating program of the actuator. By selecting “add-on gearboxes” from the SIPOS SEVEN menu, the appropriate gearbox type can be chosen. This automatically matches the actuator parameters to the gearbox. If the gearbox which has been fitted is not available in the options displayed, then the parameters can be changed independently to suit that particular gearbox.

Other products from SIPOS Aktorik

  • Small part-turn actuators
    2SG7… – for direct or lever
    mounting 32-125 Nm
    For duty ratings A, B and C
  • Actuator control systems
    2SM2… – SIMA
  • Double motor actuators
    for modulating duty
    750–3000 Nm
  • Rotary actuators for nuclear applications to KTA 3504
    M763.1 – for On-Off duty
    M763.2 – for modulating duty